24V · Rectangle · Surface Mounted · 5-Year Guarantee
Clean lines. Compact proportions. Flexible white light.
Choose the finish, area to illuminate and control. Every Linea Compact fitting includes selectable 2700K, 4000K and 6000K white light. The Project Builder suggests a practical starting quantity, then matches the correct 24V driver, required distribution and compatible controls for each lighting zone.
Save a Project Pack to share the selected lights, system parts and zones with your fitter or electrician.
Linea Compact is a 24V rectangular LED cabinet light with a stylish linear design and low 6.8mm surface mounted profile. The 175 × 50mm shape creates a clean architectural line beneath kitchen cabinets without the length of a full linear fitting.
Every finish: selectable 2700K Warm · 4000K Natural · 6000K Cool White.
Linea Compact is the compact rectangular option in the Loops 24V cabinet lighting range. Its 175 × 50mm face creates a stylish linear design while the 6.8mm height keeps the fitting discreet beneath wall cupboards. Choose Linea Compact when you want the appearance of a compact linear cabinet light rather than a round light or a long continuous LED strip.
The compact rectangular form brings a clean contemporary line beneath the cabinet while staying only 6.8mm high.
Measure the worktop or cabinet run you actually want to illuminate. The Project Builder uses that length to suggest a practical starting quantity, which you can adjust for the real layout.
Choose Aluminium, Black or Brass. Every Linea Compact light gives you 2700K, 4000K and 6000K selectable white light, then the Builder guides you through the compatible on/off control routes.
Why choose Linea Compact? It combines a compact linear form, low 6.8mm profile, three premium finishes and front accessible CCT selection. Two colour matched screws fix directly through the fitting, with no separate bracket or cover plate.
The rectangular face gives the fitting a clear linear identity while its low profile keeps the hardware visually light beneath the cabinet. It works particularly well where you want under cupboard lighting to feel more architectural than a traditional round fitting.
Aluminium, Black and Brass all use the same 4W CCT fitting, with 2700K, 4000K and 6000K selected using the CCT button on the face of each light.
A clean neutral finish that sits naturally with stainless details, pale cabinetry and contemporary kitchen schemes.
A stronger contemporary finish for dark cabinetry, black hardware and kitchens where the rectangular fitting can become part of the detail.
A warmer metallic finish for kitchens where the cabinet lighting hardware is intended to complement brass, bronze or warmer interior details.
Every Linea Compact light includes selectable CCT. Choose 2700K Warm White, 4000K Natural White or 6000K Cool White using the CCT button on the face of the fitting. The button remains accessible after installation, so you can change the white light later without removing the light.
There is no separate fixed-white version to choose. Every Linea Compact fitting gives you three selectable white light settings, so the final tone can be decided on site and changed later if the room, worktop or preferred look changes.
A warmer white that suits timber, warmer stone, brass details and kitchens where you want a softer evening feel.
Best for: warmer interiors and a softer atmosphere.A clean neutral white that works particularly well for everyday kitchen task lighting and a wide range of worktop finishes.
Best for: balanced everyday task lighting.A cooler white for contemporary kitchens, cooler finishes and customers who prefer a sharper, brighter-looking tone.
Best for: crisp contemporary interiors and cooler schemes.Linea Compact forms part of a low voltage under cabinet lighting system running at 24V DC. Each light uses 4W and each lighting zone uses one matched driver. Choose the lights and zones you want; the Project Builder matches the compatible driver, required distribution and controls for each zone.
You do not need to calculate driver wattage, count connection ports or work out which distribution accessories are required. Build each lighting zone and we match the compatible power system behind it.
The exact driver and accessories are matched to your project automatically.
The driver is sized from the combined wattage of the lights in that zone. Each Linea Compact light uses 4W. The Builder totals the combined load and selects a driver with suitable capacity.
Compatible 6 way distribution blocks expand the available light connections. One driver port feeds the block, which then provides six light connections. The Project Builder automatically adds the required quantity where needed.
No. Multiple Linea Compact lights can operate from one compatible driver when they belong to the same lighting zone. Each zone uses one matched driver; capacity and available connections determine how the lights are grouped.
A lighting zone is a group of lights that operate together. Create another zone whenever a different area needs its own driver, sensor or switching behaviour.
Six Linea Compact lights operate together from one matched driver and switch on or off with the driver’s mains supply.
Three lights operate independently and switch automatically using a PIR occupancy sensor.
A separate cabinet lighting group operates from its own driver and compatible door sensor.
Choose the supplied mains cable for fixed wiring, or add the optional 2m UK plug cable where a suitable socket is available. Mains electrical work should be completed by a suitably competent person.
For a permanent installation where the driver is wired into the electrical circuit, for example into the back of a suitable light switch or another appropriate connection point.
Choose the plug lead when you want the driver to connect to a suitable existing socket instead of being permanently wired into the installation.
Any work involving the mains electrical supply should be carried out appropriately for the installation and applicable regulations.
Linea Compact is not dimmable, so the Touch On/Off & Dimmer is not offered for this style. Choose automatic PIR or door control, or select No Sensor and use a standard on/off wall switch to control the driver’s mains supply.
Best for automatic occupancy lighting
Walk into the detection area and the whole lighting zone comes on automatically.
The lights remain on while movement or occupancy continues to be detected, then switch off around 30 seconds after movement stops.
Best for single door cupboards
Open the cabinet door and the lighting zone switches on automatically. Close it and the lights switch off again.
Designed for one cabinet door, using a short range sensor so the lighting responds as the door moves away from or returns to the sensing position.
Best for double door cupboards
Either of two independently opening doors can operate the same cabinet lighting zone.
Ideal where either door needs to bring the lights on, while keeping both doors tied to one simple control point at the driver.
Best for conventional wall switching
Choose No Sensor when the lighting zone will be switched on and off using a standard wall switch controlling the driver’s mains supply.
A mains wall dimmer is not compatible. Linea Compact and the supplied driver arrangement are on/off only for this style.
PIR and door sensors include a surface mount adapter, so you can choose the installation style that best suits the cabinet or fitted furniture.
12mm cut-out
Ø14mm max · 20mm depth
2m fitted cable
30mm wide · 16mm projection
28.5mm deep · 21mm fixing centres
Includes adhesive mounting pad and 2 × 2.5mm × 10mm screws.
The compatible PIR and door sensors switch the zone on and off. If you choose No Sensor, a standard on/off wall switch can control the driver’s mains supply. Do not use a mains wall dimmer, and do not select the Touch Dimmer used with dimmable styles.
Choose the Linea Compact finish, layout and on/off control preference. The Builder matches the compatible 24V system and updates the complete project price as you go.
Start with the worktop or cabinet area you want to illuminate. The Project Builder suggests a practical quantity; you then refine the alignment, positions and cable routes before anything is permanently fixed.
Measure the area you actually want to light rather than automatically fitting one light per cabinet door. The Builder uses that length to suggest a starting quantity.
On a run of multiple fittings, keep the 175mm bodies consistently oriented and the same distance from the cabinet front. Around 30–50mm back from the front edge is a useful starting point for task lighting, but test the real effect before permanent fixing.
Each Linea Compact light has a 2m fitted cable exiting from the rear at the short side. Decide where the driver will remain accessible, how the cable will be concealed and whether any 2m or 5m extensions are needed.
Hold the light in the proposed position, check the worktop illumination and choose the preferred 2700K, 4000K or 6000K setting. Confirm the alignment and cable route before securing the fitting with its two screws.
Linea Compact fixes directly to the underside of the cabinet using two colour matched wood screws. The screws pass straight through the fitting, so there is no separate mounting bracket or cover plate. The 2m cable exits from the rear at the short side.
Hold the light beneath the cabinet and check both the worktop illumination and how the rectangular fitting looks from normal standing positions.
The fitted 2m cable leaves the rear at the short side. Plan its route to the driver before you make any permanent fixing or concealed cable opening.
Use the CCT button on the face of the light to choose 2700K, 4000K or 6000K. The button remains accessible after installation, so the setting can be changed later.
Secure Linea Compact with the two supplied colour matched wood screws. They pass directly through the fitting; there is no bracket or cover plate to fit first.
Connect the fitted cable to the matched 24V system, keep the driver accessible and confirm the complete zone switches correctly before handover.
Yes. The CCT button remains accessible on the face of Linea Compact. Choose 2700K, 4000K or 6000K without removing the fitting.
The key dimensions, output and installation details needed to specify this compact rectangular 24V cabinet light confidently.
Every finish uses the same CCT fitting. Select the preferred white on the front of the light. Published output is 224–255lm across the selectable settings; there is no separate fixed-white version in this range.
Driver: supplied as part of the complete lighting setup selected through the Project Builder, rather than included in the single light starting price.
Linea Compact is surface mounted, so no large recessed light cut-out is required. Plan the rear cable route, keep the driver accessible and test the rectangular alignment before securing the fitting with its two screws.
Five years of cover from purchase.
We do not quote an estimated LED lifetime in hours because operating life can vary with installation and operating conditions.
Linea Compact is the compact rectangular, stylish linear option in the Loops range. Compare cabinet lights by shape, mounting method, profile, white light choice and finish, or browse all LED under cabinet lighting if you are still deciding.
Only finishes actually available for each range are shown. The text beneath the swatches updates to show which white-light options are offered in that finish. For the full range overview, compare all eight 24V under cabinet lighting styles.
Flush, discreet round light for a more integrated cabinet finish.
Classic surface-mounted round light with the broadest choice of white-light options.
Ultra-low-profile round design where minimal projection is the priority.
Angled cabinet light designed for edges, corners and a more architectural look.
Clean contemporary square design for a sharper, more architectural aesthetic.
Compact linear under-cabinet fitting with a crisp contemporary profile.
Longer linear fitting with selectable white light in a very slim profile.
Long linear fitting for projects where the preferred fixed white is already known.
Quick answers to the rectangular design, selectable white light, direct fixing and 24V compatibility questions most likely to matter before you build a Linea Compact cabinet lighting project.
Shape, profile, finish and white light choices.
Linea Compact uses a 175 × 50mm rectangular face to create a stylish linear design beneath the cabinet. At only 6.8mm high it remains low profile, but the shape gives a stronger architectural line than a traditional round fitting.
Yes. Linea Compact sits directly on the underside of the cabinet and is secured with two colour matched wood screws. It does not use a separate mounting bracket or cover plate.
No. The light itself is surface mounted. Plan only the cable route and any concealed opening needed for the fitted cable; the complete fitting does not need to be recessed into the cabinet.
Yes. The CCT button remains accessible on the face of Linea Compact. You can switch between 2700K Warm White, 4000K Natural White and 6000K Cool White without removing or uninstalling the fitting.
Each Linea Compact light uses 4W and has a published output of 224–255lm across its selectable white light settings.
No. Linea Compact is an on/off fitting. The Project Builder removes the incompatible Touch Dimmer and keeps the compatible PIR, Single Door, Double Door and No Sensor routes available.
The 2m fitted cable exits from the rear of the light at the short side. Plan the cable direction and driver position before permanently fixing the light.
Linea Compact is available in Aluminium, Black and Brass. All three finishes use the same 4W CCT fitting with selectable 2700K, 4000K and 6000K white light.
How the complete 24V system is powered, controlled and installed.
Yes. Linea Compact is a 24V DC fitting. The LED driver, sometimes called a transformer, converts mains power to the 24V DC supply used by the lights. Each lighting zone uses one matched driver, selected automatically by the Project Builder.
The Project Builder supports up to 36 Linea Compact lights in one zone and automatically matches the driver and required distribution. Create another zone when a group needs separate switching or sensor control.
Use the compatible PIR occupancy, Single Door or Double Door sensor, or choose No Sensor for a standard on/off wall switch arrangement. Linea Compact is not dimmable, so the Touch Dimmer and mains wall dimmers are not compatible.
Yes. Choose the supplied mains cable for fixed wiring, or add the optional 2m UK plug cable where a suitable socket is available. Mains electrical work should be completed by a suitably competent person.
Two supplied colour matched wood screws pass directly through the fitting into the cabinet. There is no separate bracket or cover plate, making the fixing method straightforward.
Each light includes the 24V rectangular fitting, two colour matched wood screws, a 2m fitted connection cable and the built-in CCT button for 2700K / 4000K / 6000K selection. The matched driver is selected as part of the complete project and is not included in the single-light starting price.
Linea Compact is covered by a 5-year guarantee from purchase.
Build the complete Linea Compact setup, review the matched 24V system and project price, then add it to your basket when you are happy.
From £14.84 per light
Free UK Delivery · 2–3 working days
Need advice? Build as much as you can, then use the Help option inside the Project Builder to send the complete setup to our team.
Choose your lights and how you want to control them. We'll automatically match the driver and required connections.
Continue with Zone 1's light choices, or give Zone 2 a different style.
What is a zone? One group of lights powered by one driver and controlled together. For example, worktop lights and island lights that need separate switching are two zones. Need different light styles on one shared control? Contact us before ordering.
Choose the finish that best suits your kitchen or furniture.
Choose the shade of white light that best suits your space.
Colour temperature changes the tone of white light — from warm and cosy to cool and crisp. It is different from brightness, so a cooler white does not automatically mean a brighter light.
Choose 2700K Warm, 4000K Natural or 6000K Cool White using the CCT button on the face of the light. The button remains accessible after installation, so you can change the colour temperature without removing or unclipping the fitting.
A softer, warmer white. Works particularly well with cosy interiors, warm woods, brass finishes and relaxed evening lighting.
A balanced neutral white that keeps colours looking natural. A strong all-round fixed choice for kitchens and work surfaces.
A cooler, crisper white appearance. Suits clean contemporary spaces and customers who prefer a fresher-looking white light.
Choose how many lights you want in this zone. We'll match the correct driver automatically.
Measure the worktop you want to illuminate, then use the guide below.
Selected light:Enter the illuminated worktop run and we'll suggest a starting quantity with sensible spacing between the lights and space left at both ends.
Measure the worktop length you actually want to light and note any gaps or corners.
Start at 250–300mm centres and keep the row of lights consistently positioned towards the front of the cabinet. Move them closer together for a stronger, more continuous task-light effect.
Temporarily position the lights and switch them on. Worktop finish and corners can affect the final appearance.
You choose the lights. We'll automatically match the smallest suitable compatible driver on the next step.
A driver is the required 24V power supply for your lights. We'll automatically add the smallest compatible driver to this zone, so you don't need to calculate or choose one yourself.
Why is a distribution block included? A 6-way block uses one driver light port and provides six light connections, adding five extra usable connections. We add only the minimum number needed.
What is a distribution block? It is only needed when the zone has more lights than the driver has light ports. This driver already has enough connections.
Now choose how that driver will receive mains power.
Choose how this zone should switch on, off or dim. One control operates every light in the zone.
Check your setup below before saving this zone.
Add another zone for lights you want to control separately, or review your project when all of your zones are complete.
Every light already includes its own fitted cable. Add an extension only to a light that needs extra reach; installer accessories are optional.
Every light already has its own fitted cable. First see where an extension fits, then enter the routed distance to each light and we'll calculate the recommended 2m and 5m extensions.
Add extra reach to individual lights. Choose 2m or 5m only for the fittings that need it.
Measure along the actual cable route, including behind and above the cabinets.
Adds an additional 2 metres between one light and its connection.
Total cable reach: 4m
£1.49 each
Adds an additional 5 metres between one light and its connection.
Total cable reach: 7m
£2.49 each
Check each lighting zone, including its selected accessories, before adding the completed project to your basket.
A simple component map generated from the choices above.
Planning guide only — not an electrical wiring diagram.
Useful for installers, site notes or keeping a copy of the parts and cable planning.
Ask us anything you're unsure about and we'll receive a copy of the complete lighting project you've just built.
