QTY 2x DMX Terminator 3 Pin XLR Male Connector 120 OHM Light Effects Loop End
DMX Terminator
Overview -
A DMX Terminator is used when you are using a lot of DMX fixtures in a line (daisy chained). A terminator is used to trick the transmitting device into thinking that the cable is an infinite length which stops the signal from the transmitter reflecting back down the cable, also known as shadowing. It removes a lot of interference on the DMX line which improves the quality of output from your fixtures. It is essential that a good quality cable is used as well to reduce noise and flickering. The terminator plugs into the out going socket at the end of the DMX line.
This adaptor is designed to terminate a 3-pin DMX daisy chain set-up.
Please note this is NOT designed to connect to a cable.
Technical
Impedance 120 Ohms.
120 Ohms resistor connected between pins 2 and 3.
3-pin XLR male connector.
Nickel plated