3 in 1 Coaxial Compression Crimp Tool & 10x RCA PHONO Male Connectors RG6 Plug
BUY ANY 3 ITEMS & GET 5% OFF. ENTER "BUY3" AT CHECKOUT.
3-in-1 Compression Crimp Tool + 10x RCA Connectors
Used for – This is an essential kit for anyone needing to crimp or fit RCA compression connectors to RG6 coaxial cable. The kit is supplied with 10x high quality RCA compressions connectors. The compression crimp tool is also supplied with 3 interchangeable adapters that allow you to crimp up to 3 different types of connectors (BNC, RCA and F-Type).
Useful Features (tool) – Our high quality, professional crimp tool is extremely easy to use, a comfortable hand grip has also been installed to avoid causing any discomfort after extended use. There is a handy locking mechanism that keeps everything compact and safe when the crimpers are in your toolbox. The crimp tool is waterproof allowing it to be used in a number of different environments without subjugating it to stress or damage. The interchangeable adapters can also be stored within the tool when they are not use so you won’t lose them.
Useful Features (Connectors) – The great thing about compression connectors is you do not need to solder. The crimp tool will cause the connector to clamp onto the inserted cable very securely. The connectors have been precision manufactured & built with very high quality components.
Directions for Install:
You will need to strip the PVC outer layer without damaging the core inside, you can do this with one of our cable strippers but if you are confident with a pair of snips/pliers, you can strip the outer layer away with either of those.
Having removed enough insulation, you will see the silver/copper coloured wire net/braid around the internal insulation. Fold this braiding back over the outer PVC layer and then remove any foil shielding.
You can now insert a RCA connector onto the prepared cable (be sure to put the relevant adapter into the tool). Be careful to ensure that the internal plastic ring of the connector goes under the outer PVC layer of your cable. Once this is pushed in, insert the cable and connector into the tool and close the handle all of the way, you have now successfully compression crimped onto your cable.
RCA Distance – 31.6 +/- 0.20mm
Fits the following Cable: Coaxial – RG6 Recommended (7.0mm outer diameter, +/-0.4mm)
Diameter – 11.5mmØ
Length – 44.5mm (uncompressed) – 40mm (compressed)