1600W Stereo Bluetooth Amplifier | 8x 200W Channel Multi Zone HiFi Matrix Mixer

1600W Bluetooth Stereo Amplifier – 8x 200W Channel Premium Audio System

Overview:

Stereo & Karaoke amplifiers are most commonly found in setup’s around the home and in simple installs when one source device is needed to play on 2 to 16 speakers at any one time. Our powerful, premium quality and versatile stereo amplifiers are extremely simple to install and very easy to use daily.

Here are a highlighted few of the many features this amplifier has:

Power – This amplifier boasts an impressive 100W RMS per channel @ 8Ohm and 200W RMS per channel @ 4Ohm and is capable of handling any domestic environment and most commercial environments (depending on the nature of the install). The audio delivered is clear & consistent even at peak volumes.

Matrix Mixer – This system has 8 channels (speaker outputs) and 4 input selectors. Channels 1 & 2 can look at one audio source… such as Bluetooth. Channels 3 & 4 can look at another… such as a line input & Channel 5 & 6 / 7 & 8 at another. However, you could also play the same thing across all channels if you wish. For example… This is perfect for playing audio from your TV in your living room & music from your phone in the kitchen. You can then combine all zones to play music in all rooms if you have a party!

Bluetooth & Media Player – This amplifier features multiple Line & AUX inputs like most amplifiers, but it also has a built-in media player. This includes wireless Bluetooth connectivity for your mobile / tablets, a USB reader, an SD card reader & FM radio receiver.

The Bluetooth function on this amplifier is also compatible with the Amazon Echo & Google Home devices.

Independent Volume Controls – There are 8 channels (speaker outputs) on this amplifier and each one has a volume control, perfect if you need one zone to be a little louder than another or completely turned off.

Microphone inputs with talk over function – This amplifier has 2 microphone inputs on the front making it perfect for use in bars, pubs, clubs, restaurants, shops and even at home as a karaoke system. Each microphone has its own volume control and the talk over function that allows you to talk over your music clearly without having to alter the volume of your music. You can also connect a wireless microphone system to this input if you prefer.

Remote Control – Each amplifier is supplied with a remote control so you can control certain functions without having to touch the amplifier (perfect for businesses if you don’t want staff to tamper with the amp).

Features:

1x – Bluetooth receiver (wireless) – version 2.3
2x – 2 RCA/Phono (red & white) inputs
1x – 2x 6.35mm (L & R) mono inputs
FM radio receiver
SD card input
USB input
AUX 3.5mm Stereo input

8x – Screw terminal / speaker cable (+ & -) outputs
4x – 2 RCA Line Outputs (single RCA for all channels)

19” Data Cabinet Ear Mounts supplied (2U)
Durable metal body with breathable air vents built in.
UK mains power cable supplied

Technical Specification:

Power Supply – 230V AC, 50Hz IEC UK mains plug
Power output RMS per channel at 4 Ohms - 200W (per channel)
Power output RMS per channel at 8 Ohms - 100W (per channel)
Bluetooth Range – 10m
Thermal cut-out, over-current, over-voltage & short-circuit protection

Dynamic Range – 92dB
Input impedance – 20k Ohms (balanced), 10k Ohms (unbalanced)
Frequency Response – 20Hz - 20kHz ±0.5dB
Class D Amplifier


Dimensions – 482mm x 88mm x 300mm (WxHxD)
Weight – 9000g

Further Information – How to install:

1) - Connect one of your source devices (iPod or Laptop for example) to the amplifier via the 2RCA line input on the back of the amp or via Bluetooth.

2) - You can now connect the amplifier to your speakers by attaching a length of speaker cable to the positive and negative connections on the back of the amplifier. These positive and negative connections are often referred to as screw block terminals. Strip back the end of your speaker cable, insert and tighten up the screw terminals.

3) - Finally, plug the UK mains power cable supplied into the power point on the back of the amplifier, take the other end of the cable and plug into a mains power socket. You can now simply select the input and this will play through the connected speakers.

If you are connecting via Bluetooth, simply turn Bluetooth on, on your device (make sure your device is visible under its Bluetooth settings). Then search for compatible devices and your device (phone for example) will find the amplifier. Follow the instructions given to you and you will then be able to play your music / speech wirelessly.

This unit will connect to the Amazon Echo or Google Home Hub wirelessly.

We also stock the following products that you may need for a stereo set-up:

Speakers
Speaker Cable
Interconnect Cables (2 RCA cables, 3.5mm cables and 3.5mm to 2 RCA cables)
Rack Mount Data Cabinets

Please search our shop or get in touch if you need any additional products or technical help, we are always happy to help you figure out the perfect audio solution.