PRO Bar Club Sound System 4x Loud Wall Speaker 2 Channel 1000W Music Player Kit

Premium Power Amplifier and 4x 300W Speakers With Wall Brackets Kit

Perfect for Night Clubs, Social Clubs, Bars, Restaurant Discos, & Gigs in Pubs

What’s Included?

1x 1000W Dual Channel Power Amplifier
4x (2 Pairs) 300W 10” Premium Speakers
4x Adjustable Speaker Wall Brackets
1x Instruction manual

Overview:

Designed to be installed in Night Clubs, Social Clubs, bars, or a pub environment, this kit allows you to play music through the 4x 300W wall mountable speakers. Perfect for parties, discos, club nights and gigs.

This amplifier is rated at an impressive 1000W (500W per channel) & is suitable at 2, 4 or 8OHM operations. It will consistently deliver a premium audio signal to the supplied speakers allowing you to fill any room with a loud, un-distorted & crisp sound.

The Amplifier has a L&R RCA line input & a L&R 6.35mm Mono Input. It also has a variety of speaker outputs including a 6.35mm jack, Speaker binding post outputs and Speaker (SPEAKON) outputs. We recommend using a Speaker (SPEAKON) Cable to run from the amplifier to the supplied speakers as they also have this connection.

The volume of the left and right channel can be controlled individually from the amplifier. This can be handy as not all rooms are the same and some installs require different speakers at different volumes depending on where they are situated.

The supplied speakers have a Speaker (SPEAKON) input (from the amp) and a Speaker (SPEAKON) out. This allows you to add a second speaker to the original connection at the amplifier. Simply connect 2 speakers this way to the left channel of the amplifier and repeat with the other 2 speakers for the right channel.

Each speaker is supplied with a premium, adjustable wall bracket. These will allow you to mount the speakers in a fixed position at the perfect height for your listening audience. The brackets will tilt downwards up to 45 degrees. This will enable you to mount the speakers out of reach whilst still delivering high quality music in the correct direction.

Technical specification – Amplifier:

Power supply – UK Mains Plug to IEC – 230VAC, 50Hz
Frequency response - 20Hz - 20kHz
Input sensitivity - 775mV, 10k Ohms
S/N ratio - >98dB
THD - <0.5%
Fuse rating - T2A (240V) / T4A (110V)
Power max @ 4 Ohms - 2 x 500W
Power RMS @ 4 Ohms - 2 x 250W
Power RMS @ 8 Ohms - 2 x 160W
Dimensions - 482mm (W) x 380mm (D) x 88mm (H)
2U Rack mountable
Weight – 9kg

Technical specification – Speakers:

Passive Speaker (powered by supplied amplifier)
Speaker (SPEAKON) input & output
Power MAX – 300W
Power RMS – 150W
Woofer size – 10” (250mm)
Frequency Response – 50Hz – 20kHz
SPL @ 1W/1m – 95dB
Rigid steel grille and easy-carry handle
Multiple mounting points
Titanium compression driver
35mm pole / bracket mounting slot
Weight (each) – 6.5KG

Dimenions:
Width (Front) – 320mm
Width (Rear) – 180mm
Height – 470mm
Depth – 260mm

Technical Specification – Adjustable Wall Bracket:

Adjustable Tilt - 45, 67.5 and 90 degrees
Weight Limit - 40KG
Colour - Black
Height of Wall Plate - 200mm
Width of Wall Plate - 116mm
Length of Arm - 280mm
35mm Diameter Tube Mount - designed to fit the supplied speakers

Further information - If you require any other accessories such as source/speaker cables or just some advice on how this system works, please feel free to get in touch with our friendly technical team.