Other Power Tools

'--> Diamond Grit Holesaw Kit 11pce 19-57mm OverviewDiamond grit tipped holesaw kit. For cutting marble and ceramic tiles. Also suitable for ...

'--> Assorted Drill Set 126pce 126pce Overview42 x HSS titanium drill bits 1-10mm; 10 x masonry drill bits 3-10mm; 10 x wood drill bits 3-10m...

'--> Diamond Core Drill Kit 5pce 38 - 127mm OverviewContents: 38, 52, 65, 117 and 127mm core drills. 4 x arbors, guide drill and drift key.

'--> Flush Trim Cutter 6.35 x 12.7mm OverviewFlush cutter for trimming hard laminates such as kitchen tops. Glue must be dry to prevent fouli...

--> Hex Shank Drill Set 7pce 3 - 6.5mm OverviewTitanium-coated, 1/4 inch hex shank pilot drill bits for drilling pilot holes without undoing ...

'--> Diamond Burr Set 30pce 3.17mm shank Overview150 grit assorted diamond points. For craft, modelling, repair. Use on ceramics, tiles, bric...

'--> Dowel Centre Point Set 8pce 6 - 12mm OverviewChrome plated. For accurate alignment of drill holes when dowel-pinning joinery. Pack of 8 ...

'--> Double-Row Twist-Knot Bowl Cup 100mm OverviewFor rust, paint, contaminant removal. Also for descaling, deburring and preparation of weld...

'--> Grinding Wheel Fine OverviewHeavy duty replacement grinding wheels for sharpening blunt tools. Includes 1/2 inch, 5/8 inch and 3/4 inch ...

'--> SDS Plus Adaptor 1/2 inch Connector OverviewShort SDS Plus chuck adaptor fits most 1/2 inch x 20 chucks and prevents chuck damage.

'--> Magnetic Nut Driver 10 x 65mm OverviewChrome vanadium. Use for driving hex nuts and bolts. 1/4 inch hex shank.

'--> Mixing Paddle Zinc Plated 600 x 140mm OverviewZinc-plated for mixing paint, cement slurries and textured coatings. For use with most pow...

'--> Tungsten Grit Holesaw Kit 8pce 33-83mm OverviewContains 33, 53, 67, 73 and 83mm tungsten carbide grit holesaws; 8mm pilot drill; univers...

'--> Worktop Jig 900mm OverviewCuts standard left and right hand joints, corner joints and peninsular joints in worktops up to 900mm width. E...

'--> TCT Masonry Circular Cutter 77mm dia OverviewFor drilling into brick, breeze block and concrete block (max 45 Newtons). Use with square ...

'--> Damaged Screw Remover Set 50mm OverviewRemove damaged screws without damaging surrounding material. Fit the Damaged Screw Remover into d...

--> Tungsten Carbide Mortar Rake 10mm Coarse OverviewFor removing mortar between brickwork and stonework prior to re-pointing. Fits angle gri...

'--> Down Light Installers Kit 9pce 50-86mm OverviewKit includes sizes necessary to install most downlights. Contents: 50, 60, 65, 72, 75 and...

'--> Template Cutter 1/2 inch x 3/4 inch x 1/2 inch OverviewSharp TCT cutting edges. For use with router templates or jigs. Twin fluted for s...

'--> Solid Board Access Cutter 110mm OverviewFor drilling access holes in solid boards up to 25mm thick. Integrated rebate cutter for hole co...

'-->Magnetic Nut Driver 5/16 inch x 65mm OverviewChrome vanadium. Use for driving hex nuts and bolts. 1/4 inch hex shank.

'--> Twist-Knot Cup 80mm OverviewFor rust, paint, contaminant removal. Also for descaling, deburring and preparation of welding seams. M14 x ...

'--> Holesaw Kit 16pce 19-127mm OverviewHeat treated teeth. For hard and soft woods, plastic, plasterboard and non ferrous metals. Contains 1...

'--> Polycarbide Abrasive Disc 100mm OverviewPolycarbide abrasive wheel with 6mm shank for removal of rust, paint and flaking materials. Made...

'--> Twist-Knot Bowl Cup 65mm OverviewFor rust, paint, contaminant removal. Also for descaling, deburring and preparation of welding seams. M...

'--> Drill Stand 500mm high OverviewFor use with hand-held electric drills with collar diameter of 43mm (or 38mm with supplied reducing bush)...

'--> Filament Flap Brush 100mm OverviewNylon threads impregnated with abrasive grit for removal of contaminants, rust, paint and scale. Non-s...

'--> Holesaw Kit 10pce 21-64mm OverviewIncludes popular sizes: 21, 25, 29, 38, 44, 51 and 64mm holesaws, pilot drill, arbor and hex key.

'--> Filament Wheel 75mm OverviewNylon threads impregnated with abrasive grit for removal of contaminants, rust, paint and scale. Non-sparkin...

'--> Filament Cup 75mm OverviewNylon threads impregnated with abrasive grit for removal of contaminants, rust, paint and scale. Non-sparking....

'--> Twist-Knot Bowl Cup 100mm OverviewFor rust, paint, contaminant removal. Also for descaling, deburring and preparation of welding seams. ...

'--> End Twist Brush 22mm OverviewTwisted steel, flat trimmed wire brush with 6mm dia shank, for use with power drills.

'--> Diamond Core Drill Kit 6pce 38 - 127mm OverviewComprehensive kit of diamond core drills. Contains 38, 52, 65, 107, 117 and 127mm cores; ...

'--> SDS Plus Masonry Drill & Steel Set 15pce 15pce Overview5.5, 6 x 110mm; 5.5, 6, 6.5, 7 x 160mm; 8, 10 x 160mm; 10, 12, 16 x 260mm. Ch...

'--> Diamond Wheel Dresser 40 x 10mm Head OverviewHeavy duty diamond coated head with knurled handle. Dresses across the width of grinding wh...

'--> Electricians Bi-Metal Holesaw Kit 9pce 18-51mm OverviewVariable pitch holesaws in bi-metal construction. Hardened HSS teeth, flexible hi...

'--> Dowel Drill Set 3pce 6, 8 & 10mm OverviewPrecision ground, pre-cutting blades for a cleaner cut. Includes depth collars for accurate...

'--> Drill & Countersink Set 7pce 3.2 - 5.5mm OverviewDrills clearance holes and countersink in one operation. Ready fitted with high per...

'--> Flush Trim Cutter 12.7 x 25.4mm OverviewFlush cutter for trimming hard laminates such as kitchen worktops. Glue must be dry to prevent f...

'--> Magnetic Nut Driver 8 x 65mm OverviewChrome vanadium. Use for driving hex nuts and bolts. 1/4 inch hex shank.

'--> Steel Crimp Cup 100mm Overview0.3mm hardened steel wire for fast removal of contaminants, rust and paint. M14 x 2 female thread for use ...

'--> TWSSAE Triton Support Arm Extension For The Triton Wetstone Sharpener TWSS10 OverviewSupport Arm Extension for use with the Triton Wetsto...

'--> SDS Plus Chisel 20 x 250mm OverviewFits all SDS Plus machines. 14mm round shank.

'--> Brass Brush Set 3pce 5, 16, 22mm OverviewWith fitted 3mm diameter mandrels. Brush diameters: 22, 16 and 5mm. Max 28,000rpm.

'--> Tile Drilling Jig 120mm OverviewHeavy duty suction plate. 4-hole drilling template for 6, 8, 10, and 12mm drills.

'--> Brass Crimp Cup 100mm OverviewSolid brass wire crimp cups for light cleaning. For use on stainless steel.

'--> Twist-Knot Cup 100mm OverviewFor rust, paint, contaminant removal. Also for descaling, deburring and preparation of welding seams. M14 x...

'--> HSS Step Drill Set 3pce 3pce OverviewTitanium coated. Use for drilling sheet metal up to 4mm thick. Sizes: 4-12mm, 4-20mm and 6-30mm.