Other Power Tools

'--> Diamond Grit Holesaw Kit 11pce 19-57mm OverviewDiamond grit tipped holesaw kit. For cutting marble and ceramic tiles. Also suitable for ...

'--> Assorted Drill Set 126pce 126pce Overview42 x HSS titanium drill bits 1-10mm; 10 x masonry drill bits 3-10mm; 10 x wood drill bits 3-10m...

'--> Diamond Core Drill Kit 5pce 38 - 127mm OverviewContents: 38, 52, 65, 117 and 127mm core drills. 4 x arbors, guide drill and drift key.

'--> Flush Trim Cutter 6.35 x 12.7mm OverviewFlush cutter for trimming hard laminates such as kitchen tops. Glue must be dry to prevent fouli...

--> Hex Shank Drill Set 7pce 3 - 6.5mm OverviewTitanium-coated, 1/4 inch hex shank pilot drill bits for drilling pilot holes without undoing ...

'--> Diamond Burr Set 30pce 3.17mm shank Overview150 grit assorted diamond points. For craft, modelling, repair. Use on ceramics, tiles, bric...

'--> Dowel Centre Point Set 8pce 6 - 12mm OverviewChrome plated. For accurate alignment of drill holes when dowel-pinning joinery. Pack of 8 ...

'--> Double-Row Twist-Knot Bowl Cup 100mm OverviewFor rust, paint, contaminant removal. Also for descaling, deburring and preparation of weld...

'--> Grinding Wheel Fine OverviewHeavy duty replacement grinding wheels for sharpening blunt tools. Includes 1/2 inch, 5/8 inch and 3/4 inch ...

'--> SDS Plus Adaptor 1/2 inch Connector OverviewShort SDS Plus chuck adaptor fits most 1/2 inch x 20 chucks and prevents chuck damage.

'--> Magnetic Nut Driver 10 x 65mm OverviewChrome vanadium. Use for driving hex nuts and bolts. 1/4 inch hex shank.

'--> Mixing Paddle Zinc Plated 600 x 140mm OverviewZinc-plated for mixing paint, cement slurries and textured coatings. For use with most pow...

'--> Tungsten Grit Holesaw Kit 8pce 33-83mm OverviewContains 33, 53, 67, 73 and 83mm tungsten carbide grit holesaws; 8mm pilot drill; univers...

'--> Worktop Jig 900mm OverviewCuts standard left and right hand joints, corner joints and peninsular joints in worktops up to 900mm width. E...

'--> TCT Masonry Circular Cutter 77mm dia OverviewFor drilling into brick, breeze block and concrete block (max 45 Newtons). Use with square ...

'--> Damaged Screw Remover Set 50mm OverviewRemove damaged screws without damaging surrounding material. Fit the Damaged Screw Remover into d...

--> Tungsten Carbide Mortar Rake 10mm Coarse OverviewFor removing mortar between brickwork and stonework prior to re-pointing. Fits angle gri...

'--> Down Light Installers Kit 9pce 50-86mm OverviewKit includes sizes necessary to install most downlights. Contents: 50, 60, 65, 72, 75 and...

'--> Template Cutter 1/2 inch x 3/4 inch x 1/2 inch OverviewSharp TCT cutting edges. For use with router templates or jigs. Twin fluted for s...

'--> Solid Board Access Cutter 110mm OverviewFor drilling access holes in solid boards up to 25mm thick. Integrated rebate cutter for hole co...

'-->Magnetic Nut Driver 5/16 inch x 65mm OverviewChrome vanadium. Use for driving hex nuts and bolts. 1/4 inch hex shank.

'--> Twist-Knot Cup 80mm OverviewFor rust, paint, contaminant removal. Also for descaling, deburring and preparation of welding seams. M14 x ...

'--> Holesaw Kit 16pce 19-127mm OverviewHeat treated teeth. For hard and soft woods, plastic, plasterboard and non ferrous metals. Contains 1...

'--> Polycarbide Abrasive Disc 100mm OverviewPolycarbide abrasive wheel with 6mm shank for removal of rust, paint and flaking materials. Made...