2x ADJUSTABLE MIC/MICROPHONE CLIP HOLDER STAND REMOVABLE Boom Arm

This listing is for 2 Microphone Stands - 1 Pair

Microphone Stand - Height Adjustment 0.85m to 1.9m

Colour - Black

Overview - The stand features a rotary plastic collar for height adjustments allowing the stand to be used comfortably seated or standing by the tallest (or shortest!) vocalist, or fully extended to allow overhead positioning for drums or ambient recordings. Simply grip the textured surface of the rotary collar and rotate it in order to slide the upper portion of the stand up or down.

Setup - To set up the stand, start from the ground and work your way up, unfolding and locking each section in turn, when it comes to the adjustable sections, loosen the rotary screw, position the boom where it’s needed, then tighten the nut to lock it. A converter is also included for affixing a microphone clip with a standard 3/8th or 5/8th thread, as well as 2 cable clips for securing the cable, visible in the product image above.

Portable - The stand collapses to a little over 96cm / 3ft long. Combined with its light weight, this makes it ideal for bands, mobile DJs or travelling P.As, as it will stow easily in the smallest hatchback.

Construction - This lightweight, robust microphone stand is constructed from hardwearing, black powder coated alloy, with rubber coated feet to help insulate from noise and vibration, which is essential for a really clean sound.

Adjustable - Two ‘T-style’ locking nuts (like pictured on the left) with hard wearing resin knobs, 1 for locking the base, and one for the angle of the boom. A rotary screw secures the upper sliding portion of the boom, a must for those who play seated instruments, since the stand itself can be placed quite far away, giving them room to work without fear of knocking it over. Should a short stand be needed, for instance for mic’ing a bass drum or small guitar amplifier, the boom can be removed, and the microphone clip screwed directly to the stem, for a microphone height of approx 75cm / 2’6”.

2 x 3/8th locking, star-shaped washers secure the stand at the two points where it disassembles, at the boom and the microphone clip. On both these threaded sections, a locking washer sits at the base of the thread. Once you’ve screwed on the boom section or microphone clip, rotate the star shaped washer in the opposite direction until it comes into contact with the part you’ve just screwed on. This prevents the part working itself loose when subjected to vibration or “enthusiastic handling.”

Note - No Microphone clip is supplied with this stand, a clip will generally be included with your Microphone. If not, one can be found in our shop.

Further Details;

Fully extended the stand will position a microphone from 2’6”(85cm) to 6’6”(1.9m)

Boom Length - 82cm

Folded dimensions: 960x100x100mm / 37.8x4x4in

Weight – 2.62Kg

Standards - ROHS Compliant and CE Approved