2x 24V Dimmable Round Recessed LED Under Cabinet Lights with Driver – Aluminium, Colour Changing White (CCT)
Build Your Lighting Project
Choose your lights and how you want to control them. We'll automatically match the driver and required connections.
Set up Zone 2
Continue with Zone 1's light choices, or give Zone 2 a different style.
Select a style for Zone 1
What is a zone? One group of lights powered by one driver and controlled together. For example, worktop lights and island lights that need separate switching are two zones. Need different light styles on one shared control? Contact us before ordering.
Select a finish for Zone 1
Choose the finish that best suits your kitchen or furniture.
Select a light colour for Zone 1
Choose the shade of white light that best suits your space.
Choose your white light with confidence
Colour temperature changes the tone of white light — from warm and cosy to cool and crisp. It is different from brightness, so a cooler white does not automatically mean a brighter light.
Choose Warm, Natural or Cool White using the small switch on the back of each light. Unclip the light to change it later — ideal if you are unsure now or want the flexibility to change the mood.
A softer, warmer white. Works particularly well with cosy interiors, warm woods, brass finishes and relaxed evening lighting.
A balanced neutral white that keeps colours looking natural. A strong all-round fixed choice for kitchens and work surfaces.
A cooler, crisper white appearance. Suits clean contemporary spaces and customers who prefer a fresher-looking white light.
How many lights do you need in Zone 1 ?
Choose how many lights you want in this zone. We'll match the correct driver automatically.
Plan your light layout
Measure the worktop you want to illuminate, then use the guide below.
Selected light:Enter the illuminated worktop run and we'll suggest a starting quantity with sensible spacing between the lights and space left at both ends.
Measure the worktop length you actually want to light and note any gaps or corners.
Start at 250–300mm centres and keep the row of lights consistently positioned towards the front of the cabinet. Move them closer together for a stronger, more continuous task-light effect.
Temporarily position the lights and switch them on. Worktop finish and corners can affect the final appearance.
You choose the lights. We'll automatically match the smallest suitable compatible driver on the next step.
Your lights and driver, automatically matched
A driver is the required 24V power supply for your lights. We'll automatically add the smallest compatible driver to this zone, so you don't need to calculate or choose one yourself.
Why is a distribution block included? A 6-way block uses one driver light port and provides six light connections, adding five extra usable connections. We add only the minimum number needed.
What is a distribution block? It is only needed when the zone has more lights than the driver has light ports. This driver already has enough connections.
How will the driver connect to mains power?
Now choose how that driver will receive mains power.
How would you like to control Zone 1 ?
Choose how this zone should switch on, off or dim. One control operates every light in the zone.
Review Zone 1
Check your setup below before saving this zone.
Your Lighting Zone
What would you like to do next?
Add another zone for lights you want to control separately, or review your project when all of your zones are complete.
Extensions & Accessories
Every light already includes its own fitted cable. Add an extension only to a light that needs extra reach; installer accessories are optional.
Work out exactly which extension leads you need
Every light already has its own fitted cable. First see where an extension fits, then enter the routed distance to each light and we'll calculate the recommended 2m and 5m extensions.
Light Extension Leads
Add extra reach to individual lights. Choose 2m or 5m only for the fittings that need it.
Measure along the actual cable route, including behind and above the cabinets.
2m Extension Lead
Adds an additional 2 metres between one light and its connection.
Total cable reach: 4m
£1.49 each
5m Extension Lead
Adds an additional 5 metres between one light and its connection.
Total cable reach: 7m
£2.49 each
Optional
Accessories for installers
WAGO connectors for optional mains wiring — most customers will not need these.
2 Way WAGO Connector
£0.79 each
3 Way WAGO Connector
£0.89 eachReview Your Lighting Project
Check each lighting zone, including its selected accessories, before adding the completed project to your basket.
How your project connects
A simple component map generated from the choices above.
Planning guide only — not an electrical wiring diagram.
Installation & returns notes What is included, what your installer may still provide, and returns information
Save your project plan
Useful for installers, site notes or keeping a copy of the parts and cable planning.
Control
Send Your Lighting Project To Us
Ask us anything you're unsure about and we'll receive a copy of the complete lighting project you've just built.
Ready to buy kit: A ready to buy 2 light 24V round LED under cabinet lighting kit in Aluminium with Colour Changing White (CCT) LEDs, supplied with the matched driver and dimmer. Designed for recessed installation.
What is included?
2x Aluminium round recessed LED light with 2m driver lead.
1x 8W 24V LED driver.
1x Touch dimmer sensor.
1x 1m figure-eight to bare-end mains lead.
LED Light Technical Specification
2x aluminium round recessed LED light.
Recessed mounting.
Selectable warm, natural or cool white light.
Colour temperature: 2700K, 4000K or 6000K, selected using the switch on the light.
Operating voltage: 24V DC.
Power: 2W per light.
Total light load: 4W.
Light output: 150 to 180 lumens per light.
Beam angle: 120 degrees.
Cable length: 2m per light.
Dimensions: 65mm diameter x 14mm recessed depth.
Required cut-out: 58mm diameter.
Dimmable using the included touch dimmer.
Driver Technical Specification
1x 8W LED driver.
Output: 24V DC.
4x light connection ports.
Separate dedicated connection port for the included touch sensor.
Dimensions: 104mm x 48mm x 16.5mm.
Supplied with a 1m figure-eight to bare-end mains lead for a wired mains connection.
The driver can be wall or cabinet mounted, but mounting fixings are not supplied.
A compatible figure-eight to UK plug lead can also be used if you would prefer to connect the driver to a standard socket. If doing so, ensure the plug is fitted with the correct fuse.
For indoor use only. Do not expose the driver to water.
Touch Sensor / Dimmer Technical Specification
1x touch dimmer sensor in a sleek anthracite plastic finish.
Tap the sensor to switch the connected light on or off. Touch and hold to adjust the brightness. The first touch and hold will decrease the brightness. Release the sensor, then touch and hold again to increase the brightness.
The light will remember your selected brightness setting, even after being switched off and back on again.
Dimming range: 5 to 100 percent.
Working voltage: 12 to 24V DC.
IP20 rated for dry indoor use.
Can be recessed into a 12.2mm hole or surface mounted using the supplied bracket.
A Considered Finish for Your Kitchen
The compact, round diffused LED sits neatly within the cabinet for a discreet, integrated finish. Choose between warm, natural or cool white on the fitting to complement your kitchen and create the right atmosphere.
The included touch dimmer lets you move easily from brighter task lighting to a softer evening setting, while remembering your preferred brightness level for next time.
The included driver converts the mains supply to the 24V DC required by the light and has been carefully selected to suit the supplied fitting. The components are matched for you, making it easier to create a neat and reliable lighting setup without having to work out driver compatibility yourself.
Installation and Planning
Prepare a 58mm cut-out for the fitting and allow for the 14mm recessed depth, together with sufficient clearance for the cable.
Plan your cable route before installing the light and check that all cables will comfortably reach the driver before fixing anything permanently.
Select your preferred white colour temperature using the switch on the rear of the light before seating the fitting into the cabinet.
The light connects directly to one of the light output ports on the driver, while the touch dimmer connects to the driver's dedicated sensor port.
Keep the driver accessible after installation for future inspection or maintenance. If you have any doubts about making the mains connection, we recommend using a qualified electrician.
For indoor use only. Do not expose the light, driver or sensor to water.
Compatible 2m and 5m extension leads are available separately if additional cable length is required. We recommend adding no more than 5m of extension cable to each individual light.
Guarantee
Five-year guarantee.
Includes a 12-month standard guarantee, with extended manufacturer cover bringing the total guarantee period to five years.