3x MATT BLACK Round Surface or Flush Under Cabinet Kitchen Light & Driver Kit - Natural White LED

3x Matt Black Under Cabinet Light – 2.3W Natural White LED

1x 8W, 3 Port LED Driver / Transformer

LED Lights

Light Casing Colour – Matt Black

Light Colour Appearance – Natural White

Colour Temperature – 4000 - 4500 Kelvin

Lumens – 150lm

Wattage – 2.3W (per light)

Voltage - 12Vdc (per light)

Number of Hours - 30,000

Lumens per Watt – 65 Lm/W

Beam angle - 120°

Colour Rendering Index - Ra 80

Cable Length (per light) – 2m

IP20 Rated

Dimensions (per light) – 64mm (diameter) x 16.5mm

Total Height (surface mounted) – 17.5mm

Total Height (flush mounted) – 1mm

Driver (Power Converter)

Voltage - 12Vdc

Wattage - 8W

Number of Ports - 3

A driver converts mains voltage (240V AC) to 12V DC. Our range of efficient kitchen lights run on a low voltage, this conserves energy without compromising on brightness. Every light that we sell has a wattage rating. For example, if you have a light rated at 2.6W and you have 3 of them, your total wattage consumption would be 7.8W. To put this simply, your drivers wattage rating must be equal to or greater than 7.8W in order for this to work (pulling through more watts than a driver is rated to will cause the driver to blow).

We know that this can sound a little tricky so in order to save you the hassle of working this out, all our light kits include a driver that is specifically designed to work safely and efficiently with your chosen lights.

Each driver has a certain number of ports. For example, we sell a 3 port and a 6 port driver in a variety of wattages. 1 light will take up 1 port on a driver. If you require 4 lights, you would need a driver with 6 ports as there would not be enough free ports on a 3 port driver. Again, you don't need to worry about this as we have hand crafted all kits with the correct driver, simply select how many lights you require.

If you want more lights than are available in our kits, you can either buy another light and driver kit (this gives you the option of having different lights on different switches) or we also sell drivers with different numbers of ports (please search our shop or get in touch for any advice).

This light can be either surface mounted or recess mounted.

Surface Mounted – Chose where you would like to mount this and drill a small hole (10mm), this is for the driver cable. Then mount the surface mounted ring bezel using the 2x supplied fixing screws. Once fixed, the body of the light simply pushes and snap fits into the bezel with a total depth of 17.5mm

Recess / Flush Mounted – Chose where you would like to mount the light and drill a 57mm diameter hole with a minimum depth of 12mm. If your cabinet allows you to drill to a depth of 12mm without going all of the way through, simply drill a 10mm hole all the way through in this cavity for the driver cable. When the hole is drilled, simply push the fitting into place. The total depth of the fitting on show will be 1mm. 

--------------------

Now connect the lights to the driver, one light per port. Each light has a 2m long cable that connects to the driver. This sometimes isn’t long enough for your install. If not, we also sell a 2m & 5m extension cable, perfect for longer runs from the light to the driver. 

The most popular location to install a driver is above the wall units. This ensures the driver is out of sight but easy to access if required. Alternatively, the driver is slim so depending on the depth of your service gap, you can install the driver behind your carcasses.

If you are unsure of anything mentioned above, please feel free to get in touch, we will be more than happy to talk you through everything you need to know. 

Ultra Slim – Each fitting has a depth of 1mm if recessed mounted. The bezel has a peak height of 17.5mm if surface mounted and once installed, will barely be visible depending on the pelmet that you have. However, if this is seen, you can be confident that a sleek & modern fitting will be on show.

LED Technology – Each light features a diffused cover that mimics the appearance of a halogen cabinet with no visible LED points or spots. This ensures that your worktops / unit interiors are adequately & evenly lit. 

Each fitting will last for over 30,000 hours & on average, will last 16 years. After this period the bulbs will only reduce in brightness, meaning they will continue to work. This range offers the latest LED Samsung technology.

Each light and driver can be sold individually. If you haven’t quite found the right pack for your kitchen, please get in touch with your requirements and we will get back to you with a quote for a bespoke bundle ASAP.  

We sell various dimmers, switches & smart controls (smartphone app) that are suitable to use with this range, please search our shop or feel free to get in touch.

Product Code: s390