1x 24V Dimmable Round Surface Mounted LED Under Cabinet Lights with Driver – Brass, Colour Changing White (CCT)
BUY ANY 3 ITEMS & GET 5% OFF. ENTER "BUY3" AT CHECKOUT.
Build Your Lighting Project
Choose your lights and how you want to control them. We'll automatically match the driver and required connections.
Set up Zone 2
Continue with Zone 1's light choices, or give Zone 2 a different style.
Select a style for Zone 1
What is a zone? One group of lights powered by one driver and controlled together. For example, worktop lights and island lights that need separate switching are two zones. Need different light styles on one shared control? Contact us before ordering.
Select a finish for Zone 1
Choose the finish that best suits your kitchen or furniture.
Select a light colour for Zone 1
Choose the shade of white light that best suits your space.
Choose your white light with confidence
Colour temperature changes the tone of white light — from warm and cosy to cool and crisp. It is different from brightness, so a cooler white does not automatically mean a brighter light.
Choose Warm, Natural or Cool White using the small switch on the back of each light. Unclip the light to change it later — ideal if you are unsure now or want the flexibility to change the mood.
A softer, warmer white. Works particularly well with cosy interiors, warm woods, brass finishes and relaxed evening lighting.
A balanced neutral white that keeps colours looking natural. A strong all-round fixed choice for kitchens and work surfaces.
A cooler, crisper white appearance. Suits clean contemporary spaces and customers who prefer a fresher-looking white light.
How many lights do you need in Zone 1 ?
Choose how many lights you want in this zone. We'll match the correct driver automatically.
Plan your light layout
Measure the worktop you want to illuminate, then use the guide below.
Selected light:Enter the illuminated worktop run and we'll suggest a starting quantity with sensible spacing between the lights and space left at both ends.
Measure the worktop length you actually want to light and note any gaps or corners.
Start at 250–300mm centres and keep the row of lights consistently positioned towards the front of the cabinet. Move them closer together for a stronger, more continuous task-light effect.
Temporarily position the lights and switch them on. Worktop finish and corners can affect the final appearance.
You choose the lights. We'll automatically match the smallest suitable compatible driver on the next step.
Your lights and driver, automatically matched
A driver is the required 24V power supply for your lights. We'll automatically add the smallest compatible driver to this zone, so you don't need to calculate or choose one yourself.
Why is a distribution block included? A 6-way block uses one driver light port and provides six light connections, adding five extra usable connections. We add only the minimum number needed.
What is a distribution block? It is only needed when the zone has more lights than the driver has light ports. This driver already has enough connections.
How will the driver connect to mains power?
Now choose how that driver will receive mains power.
How would you like to control Zone 1 ?
Choose how this zone should switch on, off or dim. One control operates every light in the zone.
Review Zone 1
Check your setup below before saving this zone.
Your Lighting Zone
What would you like to do next?
Add another zone for lights you want to control separately, or review your project when all of your zones are complete.
Extensions & Accessories
Every light already includes its own fitted cable. Add an extension only to a light that needs extra reach; installer accessories are optional.
Work out exactly which extension leads you need
Every light already has its own fitted cable. First see where an extension fits, then enter the routed distance to each light and we'll calculate the recommended 2m and 5m extensions.
Light Extension Leads
Add extra reach to individual lights. Choose 2m or 5m only for the fittings that need it.
Measure along the actual cable route, including behind and above the cabinets.
2m Extension Lead
Adds an additional 2 metres between one light and its connection.
Total cable reach: 4m
£1.49 each
5m Extension Lead
Adds an additional 5 metres between one light and its connection.
Total cable reach: 7m
£2.49 each
Optional
Accessories for installers
WAGO connectors for optional mains wiring — most customers will not need these.
2 Way WAGO Connector
£0.79 each
3 Way WAGO Connector
£0.89 eachReview Your Lighting Project
Check each lighting zone, including its selected accessories, before adding the completed project to your basket.
How your project connects
A simple component map generated from the choices above.
Planning guide only — not an electrical wiring diagram.
Installation & returns notes What is included, what your installer may still provide, and returns information
Save your project plan
Useful for installers, site notes or keeping a copy of the parts and cable planning.
Control
Send Your Lighting Project To Us
Ask us anything you're unsure about and we'll receive a copy of the complete lighting project you've just built.
Ready to buy kit: A ready to buy 1 light 24V round LED under cabinet lighting kit in Brass with Colour Changing White (CCT) LEDs, supplied with the matched driver and dimmer. Designed for surface mounted installation.
What is included?
1x Brass round surface LED light, each with a 2m lead to connect to the driver.
1x 8W 24V LED driver.
1x Anthracite touch dimmer sensor with a surface mounting bracket.
1x 1m figure eight to bare ends mains lead.
LED lights technical specification
Surface mounting. 24V DC. 2W per light. 2W combined light load.
Selectable warm white 2700K, natural white 4000K or cool white 6000K, using the switch on each light.
Light output: 150 to 180lm per light. Beam angle: 120 degrees. Cable: 2m per light.
Dimensions per light: 65mm diameter, 16mm surface height.
Dimmable using the included touch control.
Driver technical specification
8W capacity. 24V DC output. 4 light connection ports. Separate port for the touch sensor. Dimensions: 104mm by 48mm by 16.5mm.
Suitable for wall or cabinet mounting. Driver fixing screws are not included. For dry indoor use only. Do not expose to water.
Touch dimmer sensor technical specification
Tap to switch the lights on or off. Touch and hold to reduce brightness, then release and hold again to increase it. Your chosen brightness is remembered when switching off and on using the touch control.
Dimming range: 5 to 100 percent. Working voltage: 12 to 24V DC. Anthracite plastic finish. IP20, for dry indoor use.
Recess into a 12.2mm hole or fit using the supplied surface mounting bracket.
A considered finish for your kitchen
A compact circular fitting adds a considered finishing touch beneath the cabinet, with a shallow surface ring that keeps the installation tidy. Choose warm, natural or cool white on each fitting to suit your kitchen. The included touch dimmer makes it easy to move from brighter task lighting to a gentler evening setting. The included driver converts mains electricity into 24V DC and is carefully selected to power the supplied lights, taking the guesswork out of matching the kit.
Installation and planning
Fix the surface ring, choose the white tone on the rear switch, route the cable through the ring opening and seat the light. It can also be recessed with the surface ring removed, using a 58mm cut out and allowing for a 14mm recessed depth plus cable clearance.
Connect each light to a light port on the driver. Connect the touch dimmer to the dedicated sensor port. Check cable reach before fixing anything and keep the driver accessible.
The supplied 1m figure eight to bare ends mains lead is for a wired connection. For a socket connection, use a compatible figure eight to UK plug lead with the correct fuse for the driver. A UK plug lead is not included. A qualified electrician should make the wired mains connection. The kit is for dry indoor use only and must not be exposed to water.
Compatible 2m and 5m extension leads are sold separately. We recommend no more than 5m of added extension cable per light.
Guarantee
Five year guarantee, comprising 12 months of cover plus a manufacturer extension bringing the total to five years.