3x 1000mm LED Drawer Strip Light AUTO ON/OFF PIR SENSOR Kitchen Cupboard Door

Kitchen Drawer / Cupboard LED Lights – PIR MOTION SENSOR

What’s Included:

3x Natural White, Drawer / Cupboard LED Light– With PIR ON/OFF Motion Detector
1x 6 Port, 30W Driver

Technical Specification:

LED Lights

PIR Motion Sensor Timer – Will turn on and keep on when door has been opened, will automatically turn off when door is closed onto the sensor

Light Casing Colour – Aluminium
Light Colour Appearance – Natural White
Colour Temperature – 4000 ÷ 3500 Kelvin
Voltage - 12Vdc (per light)
Wattage – 7W (per light)
Number of Hours – 30,000
Colour Rendering Index – Ra 83
Cable Length (per light) – 1.5m
IP20 Rated

Width of Fitting (including sensor) – 1000mm
Width of LED Light – 960mm

Driver

Voltage – 12Vdc
Wattage – 30W
6 Way / Port

What is a Driver?

A driver converts mains voltage (240V AC) to 12V DC. Our range of efficient kitchen lights run on a low voltage, this conserves energy without compromising on luminosity. Every light that we sell has a wattage rating. For example, if you have a light rated at 2.6W and you have 3 of them, your total wattage consumption would be 7.8W. To put this simply, your drivers wattage rating must be equal to or greater than 7.8W in order for this to work (pulling through more watts than a driver is rated to will cause the driver to blow).

We know that this can sound a little tricky so in order to save you the hassle of working this out, all our light kits include a driver that is specifically designed to work safely and efficiently with your chosen lights.

How to Mount?

These lights are designed to be surface mounted inside the top of a cupboard or drawer. Each light should be installed facing downwards as pictured in order to fill your unit with light. The sensor located to the side of the light fitting will turn the light off when an item is within a certain range of it (a unit door for example). When the door is opened, it will move away from the sensor causing the light to power on and illuminate your units. The light will then simply turn off when the door is closed again.

Each light is supplied with 2 low profile mounting brackets that the strip light will sit it once mounted, this is fixed using the supplied fixing screws. The sensor is built into the light itself so no need to mount anything else to your doors.

You can now connect the cable on the light to the supplied driver and connect that to the mains. Once connected to power, the lights will automatically turn on when movement is detected as mentioned above. No individual light switches are required for this strip light.

We also sell a 2m extension cable allowing a longer run from the light to the driver. Please search our shop or feel free to get in touch.

Further information:

This range of LED lights will modernise any room in an affordable way. Our lights pack the punch of a halogen bulb with the life and energy efficiency of an LED. Each light has a diffused cover, so no individual LED points are visible, providing a whole beam effect. Each bulb will last for over 30,000 hours & on average, will last 16 years. After this period the bulbs will only reduce in brightness, meaning they will continue to work.

This strip light is available in the following sizes so there should be one out there for most drawers and cupboards:

400mm
500mm
600mm
800mm
900mm
1000mm

Multiple lights can be connected to a single driver so please get in touch if you have a custom requirement. We will be more than happy to quote you for your perfect system.