HDMI HDBaseT Extender IR RS232 & Ethernet 1080p 3d 100m Over CAT5e CAT6 Cable

HDMI HDBaseT Extender

1080P/3D/4x2k @ 100m Lengths

What does the package include?

1 x Transmitter
1 x Receiver
1 x Instruction Booklet
1 x Power Source - 100-240V, 48V Output 1A
1 x Infrared Receiver
1 x Infrared Transmitter
4 x Mounting Brackets (Two per transmitter & receiver)

Overview:

Perfect for achieving long distance, high quality HDMI signal transmission, that would otherwise not be possible. HDBaseT requires one CAT5e/CAT6 cable (we recommend good quality pure copper cable) to be run to another location and allows an uncompressed 10.2GB/ps signal to be achieved whilst maintaining signal integrity. To put it into prospective what the extender is capable of, it is similar to using a high quality short ‘High Speed HDMI Cable with Ethernet’

Due to the bandwidth achievable by the extender, they are suitable for 1080P/3D signals and will also be suitable for future resolutions such as 4x2K (4096p). Traditional HDMI extenders are usually limited to around 50M transmissions @1080P whereas our HDbaseT extender can go twice as far at a much higher data transfer rate.

Technical:

Ethernet Functionality – Our unit also allow an ethernet cable to be connected to the transmitter for networking/internet in another location up to 100m away. Supports up to 100Mbps.

Power Over Ethernet (POE) – Our device has POE functionality, which means there is 1 power source that needs to be connected to the transmitter and the receiver will be powered too.

Infrared Eyes (IR) – There are 2 infared eyes, one is connected to the transmitter and the other is connected to the receiver.

RS232

Other features

HDCP Complaint
340MHz/3.4Gbps per channel (10.2Gbps on all channels) 1080P, 60Hz, 48 Bit Resolution Supported.
CEC & RS232 signal pass through. Supports Uncompressed HDMI & Uncompressed LPCM Audio Signals Supports Compressed DTS, Dolby Digital, DTS-HD & Dolby True HD Audio (5.1 & 7.1).