480W Stereo Power Amplifier Bar Disco Hi Fi Speaker Sound System 19" 2U Rack

480W (2x 240W) Stereo Power Amplifier

Overview:

Stereo power amplifiers are most commonly found in setups around the home and in simple installs such as offices, bars, restaurants and shops when only one source device is needed to play on 2 to 4 speakers. Power amplifiers are usually required when larger and more powerful speakers are needed for an install. Our compact, high quality and versatile power amplifiers are extremely simple to install and very easy to use on a daily basis.

Equipped with twin lateral blue LED output level meters, left and right channel volume control and attractive dials, they look great in all installations. We also higher wattage amplifiers if you require a more powerful amplifier.

Features:

2 selectable line inputs
1x – 2 RCA/Phono (red & white) inputs
1x – 2 6.35mm ¼ inch mono inputs (left and right)

1x – 4mm binding post / speaker cable (red & black) outputs
1x – 6.35mm ¼ inch mono outputs (left and right)
1x – Speaker/Speakon outputs (left and right)
Sleek and compact design
Durable metal body with breathable air vents on the front and a fan cooling system built in
UK power cable supplied (IEC)
Rack mountable – Takes up 2U on a 19”
Can be set to run on either 240V or 110V
Toroidal transformer – dramatically reduces electromagnetic interference

Technical information:

Power Supply – 230V AC, 50Hz (IEC Connection)
Power output max per channel at 4 Ohms – 2x 240W
Power output RMS per channel at 4 Ohms – 2x 120W
Power output RMS per channel at 8 Ohms – 2x 80W
Dimensions – 482mm x 240mm x 88mm (WxDxH)
Frequency response – 20Hz - 20kHz
Weight – 6.5KG

Further Information – How to install:

1) - Connect one of your source devices (CD player or Laptop for example) to the amplifier via the 2 RCA line inputs or via the 6.35mm connections on the back of the amp.

2) - You can now connect the amplifier to your speakers by attaching a length of speaker cable to the positive and negative connections on the back of the amplifier. These positive and negative connections are often referred to as binding posts. Strip back the end of your speaker cable and slightly unscrew the binding post before inserting the stripped cable, now tighten back up to make a good contact. Alternatively, you can attach banana plugs to the end of the stripped speaker cable for a superior quality connection. If you have speakers that don’t have any binding post or spring terminal connections, you can always use one of the Speakon or 6.35mm outputs. Always make sure the speakers you wish to connect are either the same wattage as the amplifier or higher to avoid blowing them at higher volumes.

3) - Finally, plug the IEC to UK mains power cable supplied into the power point on the back of the amplifier, take the other end of the cable and plug into a mains power socket. You can now simply select the input and this will play through the connected speakers.

We also stock the following products that you may need for a stereo set-up:

Speakers
Speaker Cable
Banana Plugs
Interconnect Cables (2 RCA cables, Speakon Cables and 6.35mm Cables)
Rack Mount Data Cabinets

Please search our shop or get in touch if you need any additional products.