2 Port Way Masthead Splitter Booster 4G LTE F Connector Aerial Signal Amplifier
BUY ANY 3 ITEMS & GET 5% OFF. ENTER "BUY3" AT CHECKOUT.
1 Input 2 output – Outdoor Rated Masthead Booster / Amplifier
Overview – Our 1 input 2 output masthead amplifier is perfect if you live in an area with a weak aerial signal. The amplifier connects up to your aerial via its F-connector screw on type connection, amplifies the signal and allows you to split the signal and send it down 2 output cables.
4G LTE Filter – A lot of aerials suffer from interference from 4G mobile phone signal, our unit has a filter especially designed to block this type of interference giving you the best quality signal at all times.
How to install:
1. Open the outer casing by pressing the two latches on the side and lift up the cover to reveal the amplifier.
2. Connect the aerial to input of the amplifier.
3. Connect the output1 of the amplifier to masthead power supply or TV receiver, and output 2 to secondary TV set or distribution amplifier for further signal distribution.
4. Place the coax lead in the pre-cut groove and close the outer casing lid. Use the cable tie supplied to secure the amplifier to the mast.
Key Features:
Compatible with analogue and digital TV signals
Supplied with outdoor rated IP44 casing
Completely shielded for minimum interference
High gain & low noise
Fitted with a maximum output limiter to prevent any overloads
Technical Specification:
Colour – Black
Material – durable plastic
Outdoor rated – IP44
1x F-Connector input
2x F-Connector outputs
Dimensions – 110mm x 105mm x 52mm (LxWxH)
Input frequency band: UHF/VHF
Output frequency range: 47-790MHz
DC Pass: All ports 400mA Max 75ohms
Insertion loss: 47-750MHz: 3.5dB
Insertion loss: 750-790MHz: 5.5dB
Return loss: 47-750MHz: 10dB
Return loss: 750-790MHz: 12dB
Isolation: 47-750MHz: 18dB
Isolation: 750-790MHz: 18dB
Weight – 200g
If you require a masthead amplifier power supply, please search our shop or get in touch.